RC 2000, RC 2000+
A functional desktop payphone ready
to be installed at any location!
Accepts up to 5 coins.
With or without Push-To-Talk button.
Available in customized solutions!
General Characteristics
Operation voltage:
Operation Current:
Environmental working conditions:
Electrical shock protection:
Gross weight including packing:
Net weight without packing:
Space capacity of coin box:
Aproximate size:
Signal Detection/Call Supervision
|
48V +/- 5V
25mA to 52mA
-10ºC to 50ºC
> 200V AC
1.7 kg
1.45 kg
775 cm³
17x20x25 cm
Voice, Line Reversal, 50Hz
|
Features
It can be installed as a Desktop or Wall mount payphone.
Allows Local, Domestic long distance, International and Cellular calls.
The payphone can be reprogrammed using the keypad.
The payphone uses a microprocessor incorporated inside.
Detects dialing signals; Tone and Pulse; 10 PPS and 20 PPS.
Volume control.
8 digit LCD display.
The display shows the time when handset is on-hook.
When handset is off-hook the LCD can show the phones' telephonenumber
Alert sound will advice deposit of more coins to continue talking.
The payphone is able to detect 4 different kinds of coins.
The payphone can charge incoming calls.
If the phonecall is not completed, the payphone will return unused coins.
Can be programmed for free calls.
Cen be programmed to restrict phonenumbers.
By using a passcode the LCD can display the accumulated value in coinbox
Warning tone for full coinbox.
The rate and time of money are independent from each other.
All the rates are 100% programable.
30 memories for International long distance calls.
30 memories for Domestic long distance calls.
30 memories for Local phonenumbers.
The LCD will display remaining phonecall time.
4 digit owner passcode to make free calls.
1 free hot dial number.
RC 2000 Installation
- Beware to install where direct sunrays and rain
may damage the equipment.
- Beware to use the equipment near hot surfaces or water. (Motors, ventilators, dishwashers, etc.)
- Do NOT install the RC-2000 payphone near electrical wires of 110AC or 220AC,
since they may generate magnetic spectrums that could damage the equipment.
- Because the payphone is mainly intended for indoor use, beware that it is installed
near somebody taking care and protecting the unit from robbery and vandalism.
- Telephone Line
With a regular multimeter, verify that the telephone line provides the necessary
electrical conditions mentioned above. (48V, 25mA-52mA).
If the telephone line is ok, proceed to install the equipment.
- Connection Box
The connection box is needed to connect the connection jack of the payphone.
(Regular telephone jack Rj11)
|
Tel. +52 (81) 8 339-78-69
Fax. +52 (81)8 310-99-31
